Both upper edges on the nose gear well were cut off to set the doors at a proper position. The 0.5mm OD hole was drilled on the strut to be a steerable gear.
The front face of the landing light was ground to be flat and the approach lights were added on the strut.
The landing light was added.
The launch bar were modified to get a better looking and the links between the bar and the torsion link also were added using a 0.3mm OD stainless steel rod and a 0.5mm OD plastic rod. The steering pivot is 0.5mm OD stainless steel rod.
The main gears also were modified.
Since the camera under the nose was installed out of perpendicular having taken a front view, it was removed and ground the surface where met the fuselage.
To be continued.